3D Laser Cutting

3Dcutting

With the corresponding system technology even complicated spatial components like hot shaped sheets, car bodies or tubes can be cut by lasers. Laser cut tubes are used e. g. in architecture or for ground frames for fitness equipment. For this application we recommend: SC Series, DS Series, DC Series, FL Series

Rofin SC Series

With Low Powers for Industrial Use

The revolutionary Slab-principle of the SC Series, with output powers from 100 up to 600 watts, rounds down the powerful spectrum of the CO₂ laser range available from ROFIN. The SC lasers are completely sealed off so there is no need for gas recirculation equipment such as vaccum pumps or pressure control systems. As gas exchange is unnecessary before 16,000 operational hours, the running, maintenance and service costs are minimal. The complete range of SC lasers use a single resonator design producing laser light with a linear polarization. This linearly polarized beam enables protection against back reflection and makes the use in cutting machines particularly easy.

Technical Data

	ROFIN SC x10	ROFIN SC x20	ROFIN SC x30	ROFIN SC x60
Beam Activation	HF	HF	HF	HF
Output Power	100 W	200 W	300 W	600 W
Range of Power	5-100 W	5-200 W	10-300 W	8-600 W
Beam Characteristic Number	K > 0.8	K > 0.8	K > 0.8	K > 0.8
Pulse Frequency	0-100 kHz	0-100 kHz	0-100 kHz	0-100 kHz

Rofin DS Series

High Reliability Thanks to Modern Stack Management

DS series

The DS Series is the new generation of diode-pumped disc lasers offered by ROFIN.With a beam quality of 7 or 8 mm*mrad, the DS laser can produce very small spot sizes with long focal lengths. These features, combined with output powers ranging from 750 to 3,000 Watts, allow for an extensive range of industrial application processing like cutting of glass or welding of automotive parts. Flexibility in system integration is enhanced with the availability of optional beam switching, energy sharing, and fiber lengths of up to 100 meters and diameters of 150, 200, and 300 μm. The diode stack management increases laser uptime and minimizes laser diode replacement cost resulting in long lifetime and reliability.

Technical Data

	ROFIN DS x75 HQ	ROFIN DS 010 HQ	ROFIN DS 010 HX
Excitation	Laser diodes	Laser diodes	Laser diodes
Output power	750 W	1000 W	1000 W
Beam parameter product	≤ 7 mm x mrad	≤ 7 mm x mrad	≤ 12 mm x mrad
Number of discs	1	1	1
Fiber optic	150 µm	150 µm	300 µm

	ROFIN DS 015 HQ	ROFIN DS 030 HQ
Excitation	Laser diodes	Laser diodes
Output power	1500 W	3000 W
Beam parameter product	≤ 8 mm x mrad	≤ 10 mm x mrad
Number of discs	1	2
Fiber optic	150 µm	200 µm

DC Series

Highest Reliability – Lowest Maintenance Effort

DC series

Cutting, welding or surface treatment – the diffusion-cooled CO₂ Slab laser from ROFIN is the perfect tool for a wide variety of applications. The trend-setting principle of the Slab laser provides highest reliability. The laser operates with only a few extremely durable components and does not need conventional gas recirculation – leading to a considerable reduction of maintenance and service.

The gas consumption is also minimized: the gas bottle, integrated in the laser head, lasts for up to 15 months. In addition, the excellent beam quality of K = 0.95 makes the fastest cuts and deepest weld seams. With its excellent attributes and high efficiency, the ROFIN Slab laser has become a mainstream tool in countless production lines around the world.

Technical Data

	ROFIN DC 010	ROFIN DC 015	ROFIN DC 020	ROFIN DC 025
Beam Activation	HF	HF	HF	HF
Output Power	1000 W	1500 W	2000 W	2500 W
Range of Power	100-1000 W	150-1500 W	200-2000 W	250-2500 W
Beam Characteristic Number	K = 0.95	K = 0.95	K = 0.95	K = 0.95
Pulse Frequency	CW oder 2 - 5000 Hz	CW oder 2 - 5000 Hz	CW oder 2 - 5000 Hz	CW oder 2 - 5000 Hz

	ROFIN DC 030	ROFIN DC 035	ROFIN DC 040	ROFIN DC 045
Beam Activation	HF	HF	HF	HF
Output Power	3000 W	3500 W	4000 W	4500 W
Range of Power	300-3000 W	350-3500 W	400-4000 W	450-4500 W
Beam Characteristic Number	K = 0.95	K = 0.95	K = 0.95	K = 0.95
Pulse Frequency	CW oder 2 - 5000 Hz	CW oder 2 - 5000 Hz	CW oder 2 - 5000 Hz	CW oder 2 - 5000 Hz

	ROFIN DC 050 W	ROFIN DC 060 W	ROFIN DC 070 W	ROFIN DC 080 W
Beam Activation	HF	HF	HF	HF
Output Power	5000 W	6000 W	7000 W	8000 W
Range of Power	500-5000 W	600-6000 W	700-7000 W	800-8000 W
Beam Characteristic Number	K = 0.95	K = 0.95	K = 0.95	K = 0.95
Pulse Frequency	CW oder 2 - 100 Hz	CW oder 2 - 100 Hz	CW oder 2 - 100 Hz	CW oder 2 - 100 Hz

Rofin FL Series

Perfect Beam Quality for Every Application

FL Series

The high brightness fiber lasers of the ROFIN FL Series are the ideal addition to compliment the range of lasers currently offered by ROFIN. With their high performance, they are suitable for classical cutting and welding applications as well as for new applications such as the Remote Cutting. The emitted wavelength in the range of 1 μm achieves high absorption in many materials. All common solid-state laser applications can be performed using the FL Series laser. With the multi-mode version of the FL laser, fiber optics of 50 to 600 μm can be used. The single-mode version produces exceptionally good beam quality, typically in the range of ≤ 0.4 mm x mrad. The excellent beam quality also allows the efficient use of “dynamic beam” scanner systems for high-speed positioning as well as the fast and precise application of small geometries at workpieces. This reduces cycle times and increases productivity.

Technical Data

	ROFIN FL x50	ROFIN FL x75	ROFIN FL 010
Excitation	Laser diodes	Laser diodes	Laser diodes
Output power	500 W	750 W	1000 W
Beam parameter product	≥ 2,5 mm x mrad	≥ 2,5 mm x mrad	≥ 2,5 mm x mrad
Fiber optic	50 to 600 µm	50 to 600 µm	50 to 600 µm

	ROFIN FL x50 S	ROFIN FL x75 S	ROFIN FL 010 S
Excitation	Laser diodes	Laser diodes	Laser diodes
Output power	500 W	750 W	1000 W
Beam parameter product	≤ 0,4 mm x mrad (single-mode)	≤ 0,4 mm x mrad (single-mode)	≤ 0,4 mm x mrad (single-mode)
Fiber optic	20 µm	20 µm	20 µm